Product performance: ultra high molecular weight polyethylene (UHMW_PE) its viscosity-average molecular weight of 1.5 million -1200 Wan (ordinary polyethylene 2-3 million) given its advantages: 1. Plastic wear Habitat wear of UHMW-PE Crown, and is proportional to the molecular weight of more than wear certain metals, UHMW-PE, the higher the molecular weight, the better the wear resistance. 2. Impact resistance Impact strength UHMW-PE in the forefront of all engineering plastics fame, impact strength UHMW-PE is 2 times for the PC, five times the ABS and more than 10 times of POM and PBTP. The impact strength improves with increasing molecular weight, the molecular weight reaches a maximum at 2.2 million, and then continue to rise with the molecular weight gradually decreased. 3. The self-lubricating UHMW-PE has a low friction coefficient (0.05-0.11), it is self-lubricating resistance. Second only to the best self-lubricating plastic polytetrafluoroethylene (PTFE) in the absence of lubrication; when it works in the form of sliding or rotating, than steel and brass add the oil lubrication even better. The chemical resistance of UHMW-PE has excellent chemical resistance, in addition to strong fluoride acid, but tea except in a certain temperature and concentration ability of corrosive media (acids, bases, salts) and organic medium (solvent ). Immersed in 80 kinds of organic solvents 20 ℃ and 80 ℃ in 30 days, look no anomaly, other physical properties are almost no change. 5. The impact energy absorption UHMW-PE has excellent impact energy absorption, impact energy absorption maximum in all plastics. Thus noise damping is very good, with excellent sound deadening effect. 6. The non-toxic health UHMW-PE health non-toxic, fully compliant with Japan Health Association, and the US Food and Drug Administration and the US Department of Agriculture approved, it can be used in contact with food and medicines. 7. The non-stick surface adsorption UHMW-PE is very weak, and its anti-adhesion ability not only to plastic viscosity best PTEE, thus the product surface and other materials difficult to adhere to. 8. hydrophobic UHMW-PE, low water absorption, generally less than 0.01%, only 1% of PA6, which in general do not have dried before molding process. The company currently produces various models of ultra high molecular weight polyethylene sheet, and based on years of production experience and the needs of different users, based on the original ultra high molecular weight polyethylene sheet on the development of ultra high molecular weight polyethylene reinforced l plate, reinforced II plate antistatic and flame retardant ultra high molecular weight polyethylene sheet, in order to meet the needs of users in different sectors and in the use of parts of different materials. Installation: Because of ultrahigh molecular weight polyethylene liner light weight, installation is very convenient, and steel can be used for welding, drilling, special countersunk head screws, and cement structure can be expanded using a special countersunk head bolts. My company is willing to install advanced technology and rich experience in construction, reasonable cost to provide users with first-class service. Used only for the bin liner of UHMWPE five characteristics: the abrasion resistance, impact resistance, self-lubricating, non-stick and water-repellent, the other characteristics of the product needs to be further developed, hope you insight with us and seek common development, win-win cooperation. Tel: 15517230930 Li Zhijun