Description: mold (MC) oil nylon liner is formed by the polymerization of caprolactam, it offers the following advantages: 1. Excellent abrasion MC oil nylon liner with good abrasion resistance, wear resistance second only ultra high molecular weight polyethylene; 2. MC oil nylon self-lubricating very low friction coefficient, between 0.3 and 0.4, which has a good self-lubricating; 3. hydrophobicity MC oil nylon water absorption is less than 0.7, thus with good hydrophobic; 4. good heat resistance long-term use at 150 ℃ environment, the maximum temperature up to 200 ℃; 5. reduce noise for use in machinery and silos, hoppers and mixing tube, you can 10 to 15 db noise reduction; 6. good mechanical properties of the mold (MC) nylon oil is below its melting point crystal forming molecular weight, and have a good creep properties and fatigue resistance, long-term heavy duty deformation; 7. quality light performance indicators: 1, impact strength (unnotched) Kj / m2 ≥140 2, compressive strength Mpa ≥30 3, water absorption% ≤0.7 4, thermal deformation temperature ℃ 170-190 5, stretching Strength Mpa 70-80 6, 20-307% elongation at break, bending strength Mpa 36 8, Brinell hardness N / mm2 19.5-26 (ball diameter 5mm, the main test force 132N)